Acura Vehicle Models Integra 1994-2001 Torque Specifications
Acura Vehicle Models Integra 1994-2001

Acura Vehicle Models Integra 1994-2001 Torque Specifications

Complete Acura Vehicle Models Integra 1994-2001 torque specifications guide. Includes factory-specified torque values, torque sequences, and technical specifications for all components including body, brakes, drivetrain, electrical, emissions sensors, fuel, exhaust, HVAC, and suspension. Essential information for proper assembly and maintenance.

Updated

Important Information

Safety guidelines and reference information for proper torque application

Quick Reference Guide
ft-lbs → Nm
× 1.356
ft-lbs → kg-m
× 0.138
Nm → ft-lbs
× 0.738
in-lbs → ft-lbs
× 0.083

Common Torque Patterns

Star Pattern

Used for wheels and other circular bolt patterns

Star Pattern torque pattern diagram showing proper bolt tightening sequence
Cross Pattern

Used for gaskets and cover plates

Cross Pattern torque pattern diagram showing proper bolt tightening sequence
Sequential Pattern

Used for head bolts and other critical components

Sequential Pattern torque pattern diagram showing proper bolt tightening sequence

Common Mistakes to Avoid

Over-tightening

Exceeding the specified torque value can stretch or break fasteners, damage threads, or crack components.

Prevention:

Always use a calibrated torque wrench and follow specifications exactly.

Incorrect Torque Sequence

Tightening bolts in the wrong order can cause uneven pressure distribution and potential leaks or damage.

Prevention:

Follow the manufacturer's specified torque sequence pattern.

Dirty Threads

Dirt, rust, or old thread locker can affect torque readings and proper fastener tension.

Prevention:

Clean and inspect all threads before assembly. Use new thread locker if specified.

Reusing TTY Bolts

Torque-to-yield bolts are designed to stretch and must not be reused.

Prevention:

Always replace TTY bolts with new ones. They are single-use only.

Dry vs. Lubricated

Not accounting for whether torque specs are for dry or lubricated fasteners can lead to incorrect tension.

Prevention:

Check if specs are for dry or lubricated threads. Use specified lubricant when required.

Recommended Tools

Torque Wrench (1/4" Drive)

Range: 2-25 ft-lbs
Small fasteners, delicate components

Torque Wrench (3/8" Drive)

Range: 10-100 ft-lbs
Most common automotive fasteners

Torque Wrench (1/2" Drive)

Range: 30-250 ft-lbs
Large fasteners, wheels

Angle Gauge

Torque-to-yield (TTY) bolts

Torque Wrench Care

  • Calibrate annually or after 5,000 clicks
  • Store at lowest setting
  • Keep clean and lubricated

Search Specifications

Search by component name, bolt size, or description

Torque Calculator

Convert between different torque units

1.8l Engine

Torque specifications for 1.8L Engine

Cylinder Head and Valve Train

1

Cylinder Head Bolts

M12 x 1.5
Torque Specification
16 ft-lbs (22 N·m)
Important Notes
Secure the cylinder head to the engine block.
2

Valve Cover Bolts

M8 x 1.25
Torque Specification
9 ft-lbs (12 N·m)
Important Notes
Secure the valve cover to the engine block.
3

Rocker Arms/Shafts Bolts

M10 x 1.5
Torque Specification
22 ft-lbs (30 N·m)
Important Notes
Secure the rocker arms or shafts to the engine block.

Engine Block and Main Bearings

1

Main Bearing Bolts

M14 x 2.0
Torque Specification
56 ft-lbs (76 N·m)
Important Notes
Secure the main bearings to the engine block.
2

Engine Block to Transmission Mounting Bolts

M12 x 1.5
Torque Specification
40 ft-lbs (54 N·m)
Important Notes
Secure the engine block to the transmission, ensuring proper engine alignment and preventing vibration.

Crankshaft and Connecting Rods

1

Connecting Rod Nuts

M10 x 1.5
Torque Specification
22 ft-lbs (29 N·m)
Important Notes
Secure the connecting rods to the crankshaft.
2

Flywheel Bolts

M14 x 2.0
Torque Specification
79 ft-lbs (108 N·m)
Important Notes
Secure the flywheel to the crankshaft.

Timing and Accessory Components

1

Timing Belt/Chain Tensioner Bolt

M10 x 1.5
Torque Specification
33 ft-lbs (45 N·m)
Important Notes
Secure the timing belt or chain tensioner.
2

Camshaft Sprocket Bolt

M12 x 1.5
Torque Specification
53 ft-lbs (72 N·m)
Important Notes
Secure the camshaft sprocket to the camshaft.

Cooling and Lubrication Components

1

Water Pump Bolts

M10 x 1.5
Torque Specification
18 ft-lbs (24 N·m)
Important Notes
Secure the water pump to the engine block.
2

Thermostat Housing Bolts

M8 x 1.25
Torque Specification
16 ft-lbs (22 N·m)
Important Notes
Secure the thermostat housing to the engine block.

Intake and Exhaust Components

1

Intake Manifold Bolts

M10 x 1.5
Torque Specification
16 ft-lbs (22 N·m)
Important Notes
Secure the intake manifold to the engine block.
2

Exhaust Manifold/Headers Bolts

M10 x 1.5
Torque Specification
33 ft-lbs (45 N·m)
Important Notes
Secure the exhaust manifold or headers to the engine block.

Engine Mounts and Accessories

1

Engine Mounting Bolts

M12 x 1.5
Torque Specification
40 ft-lbs (54 N·m)
Important Notes
Secure the engine to the engine mounts.
2

PCV Valve to Valve Cover Bolts

M8 x 1.25
Torque Specification
8 ft-lbs (11 N·m)
Important Notes
Secure the PCV valve to the valve cover.

Body

Torque specifications for Body

Suspension and Steering

1

Strut/Shock Absorber Mounting Bolts

M12 x 1.5
Torque Specification
33 ft-lbs (45 N·m)
2

Control Arm Bolts

M14 x 1.5
Torque Specification
36 ft-lbs (49 N·m)
3

Ball Joint Nut

M16 x 1.5
Torque Specification
36 ft-lbs (49 N·m)
4

Tie Rod End Nut

M14 x 1.5
Torque Specification
36 ft-lbs (49 N·m)
5

Sway Bar Link Nut

M16 x 1.5
Torque Specification
43 ft-lbs (59 N·m)
6

Steering Gear/Rack Bolts

M12 x 1.5
Torque Specification
29 ft-lbs (39 N·m)

Body and Bumpers

1

Front Bumper Mounting Bolts

M10 x 1.5
Torque Specification
18 ft-lbs (24 N·m)
Important Notes
Estimated value. Consult manufacturer or repair manual for specific torque value.
2

Rear Bumper Mounting Bolts

M10 x 1.5
Torque Specification
18 ft-lbs (24 N·m)
Important Notes
Estimated value. Consult manufacturer or repair manual for specific torque value.

Doors and Hinges

1

Door Hinge Bolts

M8 x 1.25
Torque Specification
12 ft-lbs (16 N·m)
Important Notes
Estimated value. Consult manufacturer or repair manual for specific torque value.
2

Trunk Lid Hinge Bolts

M8 x 1.25
Torque Specification
12 ft-lbs (16 N·m)
Important Notes
Estimated value. Consult manufacturer or repair manual for specific torque value.
3

Hood Hinge Bolts

M8 x 1.25
Torque Specification
12 ft-lbs (16 N·m)
Important Notes
Estimated value. Consult manufacturer or repair manual for specific torque value.

Brakes

Torque specifications for Brakes

Brake Caliper System

1

Brake Caliper Bolts

M10 x 1.25
Torque Specification
25 ft-lbs (34 N·m)
Important Notes
These bolts secure the brake caliper to the mounting bracket. Ensure proper torque to prevent misalignment or movement during braking.
2

Brake Caliper Mounting Bracket Bolts

M12 x 1.75
Torque Specification
80 ft-lbs (108 N·m)
Important Notes
These bolts attach the caliper mounting bracket to the steering knuckle or suspension assembly. Correct torque is critical for structural integrity.

Brake Disc Drum System

1

Brake Disc/Drum Retaining Bolts

M8 x 1.25
Torque Specification
16 ft-lbs (22 N·m)
Important Notes
These bolts hold the brake disc (or drum) to the hub assembly. Ensure proper torque to prevent vibration or wobbling.

Wheel Attachment System

1

Wheel Lug Nuts

M12 x 1.5
Torque Specification
80 ft-lbs (108 N·m)
Important Notes
Although not exclusive to the brakes system, proper torque ensures the wheel assembly remains secure, allowing the brakes to function effectively.

Brake Hose And Fluid System

1

Brake Hose Banjo Bolt

M10 x 1.0
Torque Specification
16 ft-lbs (22 N·m)
Important Notes
This bolt connects the brake hose to the caliper. Ensure proper torque to prevent brake fluid leaks.
2

Brake Bleeder Screw

M8 x 1.0
Torque Specification
7 ft-lbs (9 N·m)
Important Notes
The bleeder screw is critical for purging air from the brake system. Over-tightening can damage the screw or caliper.

Parking Brake System

1

Parking Brake Cable Adjuster Nut

M8 x 1.25
Torque Specification
16 ft-lbs (22 N·m)
Important Notes
This nut adjusts the parking brake cable tension. Ensure proper torque to prevent unnecessary wear on the brake components.
2

Parking Brake Shoe Pivot Bolt

M8 x 1.25
Torque Specification
16 ft-lbs (22 N·m)
Important Notes
This bolt secures the parking brake shoes to the backing plate. Ensure proper torque to maintain alignment and function.

Master Cylinder Mounting

1

Master Cylinder Mounting Bolts

M8 x 1.25
Torque Specification
16 ft-lbs (22 N·m)
Important Notes
These bolts secure the master cylinder to the brake booster. Ensure proper torque to prevent leaks and ensure correct operation.

Drivetrain

Torque specifications for Drivetrain

Engine Block and Crankshaft

1

Flywheel Bolts

M12 x 1.5
Torque Specification
79 ft-lbs (108 N·m)
Important Notes
Proper torque ensures the flywheel is properly seated and aligned.
2

Main Bearing Bolts

M14 x 1.5
Torque Specification
56 ft-lbs (76 N·m)
Important Notes
Proper torque ensures the bearings are properly seated and aligned.
3

Connecting Rod Nuts

M10 x 1.25
Torque Specification
22 ft-lbs (29 N·m)
Important Notes
Proper torque ensures the rods are properly seated and aligned.
4

Crankshaft Pulley/Harmonic Balancer Bolt

M16 x 1.5
Torque Specification
134 ft-lbs (182 N·m)
Important Notes
Proper torque ensures the pulley/balancer is properly seated and aligned.

Transmission and Mounting

1

Transmission Mounting Bolts

M12 x 1.5
Torque Specification
40 ft-lbs (54 N·m)
Important Notes
Proper torque ensures the transmission is properly aligned and secured.
2

Engine Block to Transmission Bellhousing Bolts

M10 x 1.25
Torque Specification
30 ft-lbs (41 N·m)
Important Notes
Proper torque ensures the engine and transmission are properly aligned and secured.
3

Transmission Crossmember Bolts

M12 x 1.5
Torque Specification
40 ft-lbs (54 N·m)
Important Notes
Proper torque ensures the transmission is properly aligned and secured.

Drivetrain and Axles

1

Drive Axle/Half Shaft Bolts

M14 x 1.5
Torque Specification
58 ft-lbs (78 N·m)
Important Notes
Proper torque ensures the axles are properly seated and aligned.
2

CV Joint/Axle Nut

M16 x 1.5
Torque Specification
181 ft-lbs (245 N·m)
Important Notes
Proper torque ensures the joint is properly seated and aligned.
3

Propeller/Drive Shaft Bolts

M12 x 1.5
Torque Specification
47 ft-lbs (64 N·m)
Important Notes
Proper torque ensures the drive shaft is properly seated and aligned.
4

Axle Shaft to Hub Bolts

M14 x 1.5
Torque Specification
80 ft-lbs (108 N·m)
Important Notes
Proper torque ensures the axle shaft is properly seated and aligned.
5

Differential Cover Bolts

M10 x 1.25
Torque Specification
30 ft-lbs (41 N·m)
Important Notes
Proper torque ensures the cover is properly seated and aligned.

Electrical

Torque specifications for Electrical

Ignition System

1

Ignition Coil Bolt

M6 x 1.0
Torque Specification
8 ft-lbs (11 N·m)
Important Notes
Ensure the coil is properly seated before applying torque.
2

Spark Plug

M14 x 1.25
Torque Specification
13 ft-lbs (18 N·m)
Important Notes
Avoid over-tightening to prevent thread damage in the cylinder head.

Battery System

1

Battery Terminal Nuts

M6 x 1.0
Torque Specification
8 ft-lbs (11 N·m)
Important Notes
Ensure terminals are clean and free of corrosion before tightening.
2

Ground Strap Bolts

M6 x 1.0
Torque Specification
8 ft-lbs (11 N·m)
Important Notes
Estimated value based on similar electrical connections.

Charging System

1

Alternator Mounting Bolts

M10 x 1.5
Torque Specification
33 ft-lbs (45 N·m)
Important Notes
Follow the specified sequence to ensure proper alignment.

Starting System

1

Starter Motor Mounting Bolts

M12 x 1.75
Torque Specification
47 ft-lbs (64 N·m)
Important Notes
Ensure the starter is properly aligned with the flywheel.

Control Modules

1

Engine Control Unit (ECU) Mounting Bolts

M6 x 1.0
Torque Specification
8 ft-lbs (11 N·m)
Important Notes
Estimated value based on similar electrical components.
2

Fuse Box Mounting Bolts

M6 x 1.0
Torque Specification
8 ft-lbs (11 N·m)
Important Notes
Estimated value based on similar electrical components.

Emissions Sensors

Torque specifications for Emissions_sensors

Exhaust Manifold And Headers

1

Exhaust Manifold/Headers Bolts

M8 x 1.25
Torque Specification
33 ft-lbs (45 N·m)
Important Notes
Ensures a tight seal to prevent exhaust leaks.
2

Exhaust Manifold/Headers to Cylinder Head Bolts

M6 x 1.0
Torque Specification
16 ft-lbs (22 N·m)
Important Notes
Ensures a tight seal between the manifold/headers and cylinder head.

Exhaust Pipe And Catalytic Converter

1

Exhaust Pipe to Exhaust Manifold/Headers Bolts

M8 x 1.25
Torque Specification
33 ft-lbs (45 N·m)
Important Notes
Ensures a leak-free joint between the exhaust pipe and manifold/headers.
2

Catalytic Converter to Exhaust Pipe Bolts

M8 x 1.25
Torque Specification
33 ft-lbs (45 N·m)
Important Notes
Ensures the catalytic converter is securely attached to the exhaust pipe.
3

Catalytic Converter Heat Shield Bolts

M6 x 1.0
Torque Specification
11 ft-lbs (15 N·m)
Important Notes
Ensures the heat shield remains securely in place. Estimated value based on similar components.

Emissions Control Components

1

EGR Valve Bolts

M6 x 1.0
Torque Specification
16 ft-lbs (22 N·m)
Important Notes
Ensures the EGR valve is securely mounted and functions correctly.
2

Air Injection Reaction (AIR) Pump Mounting Bolts

M6 x 1.0
Torque Specification
16 ft-lbs (22 N·m)
Important Notes
Ensures the AIR pump is securely mounted. Estimated value based on similar components.
3

Evaporative Emissions System Purge Valve Bolts

M5 x 0.8
Torque Specification
8 ft-lbs (11 N·m)
Important Notes
Ensures the purge valve is securely installed. Estimated value based on similar components.

Emissions Sensors

1

Oxygen Sensor (O2 Sensor) Mounting Nut

M12 x 1.5
Torque Specification
32 ft-lbs (43 N·m)
Important Notes
Ensures the oxygen sensor is securely installed and provides accurate readings. Estimated value based on similar components.
2

Exhaust Gas Temperature Sensor Bolt

M6 x 1.0
Torque Specification
22 ft-lbs (30 N·m)
Important Notes
Ensures the sensor is securely installed and provides accurate readings. Estimated value based on similar components.

Exhaust

Torque specifications for Exhaust

Exhaust Manifold

1

Exhaust Manifold/Headers to Engine Block Bolts

M10 x 1.5
Torque Specification
33 ft-lbs (45 N·m)
Important Notes
Ensure proper manifold alignment before tightening. Follow a crisscross torque sequence.
2

Exhaust Manifold/Headers to Cylinder Head Bolts

M8 x 1.25
Torque Specification
16 ft-lbs (22 N·m)
Important Notes
Use a crisscross sequence to ensure even pressure distribution.

Exhaust Pipe Connections

1

Exhaust Pipe to Exhaust Manifold/Headers Bolts

M10 x 1.5
Torque Specification
33 ft-lbs (45 N·m)
Important Notes
Ensure a clean mating surface before installation.
2

Catalytic Converter to Exhaust Pipe Bolts

M10 x 1.5
Torque Specification
33 ft-lbs (45 N·m)
Important Notes
Ensure proper alignment to avoid stress on the catalytic converter.
3

Muffler to Exhaust Pipe Bolts

M10 x 1.5
Torque Specification
33 ft-lbs (45 N·m)
Important Notes
Ensure proper alignment to prevent exhaust leaks.

Miscellaneous Exhaust Components

1

Oxygen Sensor (O2 Sensor)

M12 x 1.25
Torque Specification
33 ft-lbs (45 N·m)
Important Notes
Estimated value based on typical O2 sensor bolt sizes. Ensure sensor is properly seated before tightening.
2

Exhaust Heat Shield Bolts

M6 x 1.0
Torque Specification
8 ft-lbs (11 N·m)
Important Notes
Avoid overtightening to prevent damage to the heat shield or exhaust components.
3

Exhaust Hanger Bolts

M8 x 1.25
Torque Specification
16 ft-lbs (22 N·m)
Important Notes
Ensure hangers are properly aligned to support the exhaust system.

Fuel

Torque specifications for Fuel

Fuel Delivery System

1

Fuel Rail Bolts

M8 x 1.25
Torque Specification
16 ft-lbs (22 N·m)
Important Notes
Ensures the fuel rail is securely mounted to prevent leaks.
2

Fuel Injector Bolts

M6 x 1.0
Torque Specification
8 ft-lbs (11 N·m)
Important Notes
Prevents leaks and ensures proper sealing of the fuel injectors.
3

Fuel Pressure Regulator Bolts

M6 x 1.0
Torque Specification
8 ft-lbs (11 N·m)
Important Notes
Ensures the fuel pressure regulator remains securely attached.

Fuel Tank System

1

Fuel Pump Mounting Bolts

M6 x 1.0
Torque Specification
8 ft-lbs (11 N·m)
Important Notes
Ensures the fuel pump is securely installed in the fuel tank.
2

Fuel Tank Strap Bolts

M8 x 1.25
Torque Specification
16 ft-lbs (22 N·m)
Important Notes
Ensures the fuel tank remains securely mounted to the vehicle.
3

Fuel Tank Sender Unit Bolts

M6 x 1.0
Torque Specification
8 ft-lbs (11 N·m)
Important Notes
Ensures the fuel sender unit remains securely attached to the fuel tank.

Fuel Filtration System

1

Fuel Filter Bolt/Nut

M10 x 1.5
Torque Specification
22 ft-lbs (30 N·m)
Important Notes
Ensures the fuel filter is tightly sealed to prevent leaks.

Fuel Line System

1

Fuel Line Connections (Banjo Bolts or Flare Fittings)

M8 x 1.25
Torque Specification
16 ft-lbs (22 N·m)
Important Notes
Ensures fuel line connections remain sealed and prevent leaks.
2

Fuel Filler Neck Bolts

M6 x 1.0
Torque Specification
8 ft-lbs (11 N·m)
Important Notes
Ensures the fuel filler neck is securely attached to the vehicle body.

Hvac

Torque specifications for Hvac

Ac Compressor

1

A/C Compressor Mounting Bolts

M10 x 1.25
Torque Specification
33 ft-lbs (45 N·m)
Important Notes
Ensure bolts are tightened in a crisscross pattern to evenly distribute load.

Refrigerant Lines

1

A/C Line Fittings

M8 x 1.0
Torque Specification
11 ft-lbs (15 N·m)
Important Notes
Use a torque wrench to avoid over-tightening, which can damage fittings.

Evaporator Core

1

Evaporator Core Housing Bolts

M6 x 1.0
Torque Specification
8 ft-lbs (11 N·m)
Important Notes
Estimated value based on similar HVAC housing bolts.

Blower Motor

1

Blower Motor Mounting Bolts

M6 x 1.0
Torque Specification
8 ft-lbs (11 N·m)
Important Notes
Estimated value based on similar motor mounting bolts.

Heater Core

1

Heater Core Inlet/Outlet Fittings

M8 x 1.0
Torque Specification
11 ft-lbs (15 N·m)
Important Notes
Ensure fittings are clean and free of debris before installation.

Control Panel

1

HVAC Control Panel Mounting Screws

M4 x 0.7
Torque Specification
2 ft-lbs (3 N·m)
Important Notes
Use a low-torque screwdriver to avoid over-tightening.

Condenser

1

Condenser Mounting Bolts

M8 x 1.25
Torque Specification
16 ft-lbs (22 N·m)
Important Notes
Ensure bolts are tightened in a crisscross pattern to evenly distribute load.

Mp7 Transmission

Torque specifications for Mp7 Transmission

Flywheel And Clutch

1

Flywheel Bolts

M10 x 1.25
Torque Specification
79 ft-lbs (108 N·m)
Important Notes
Ensure proper alignment and use a cross-torque sequence to evenly distribute load.
2

Clutch Pressure Plate Bolts

M8 x 1.25
Torque Specification
18 ft-lbs (24 N·m)
Important Notes
Estimated value based on typical M8 bolt torque specifications.

Transmission Mounting

1

Transmission Mounting Bolts

M10 x 1.5
Torque Specification
40 ft-lbs (54 N·m)
Important Notes
Ensure proper alignment of transmission before tightening.
2

Bell Housing Bolts

M8 x 1.25
Torque Specification
33 ft-lbs (45 N·m)
Important Notes
Estimated value based on typical M8 bolt torque specifications.

Fluid Management

1

Transmission Oil Pan Bolts

M6 x 1.0
Torque Specification
8 ft-lbs (11 N·m)
Important Notes
Avoid over-tightening to prevent gasket damage.
2

Transmission Drain and Fill Plugs

M14 x 1.5
Torque Specification
36 ft-lbs (49 N·m)
Important Notes
Ensure proper sealing to prevent leaks.

Drive Components

1

Drive Axle/Half Shaft Bolts

M12 x 1.75
Torque Specification
58 ft-lbs (78 N·m)
Important Notes
Ensure proper alignment before tightening.
2

CV Joint/Axle Nut

M24 x 1.5
Torque Specification
181 ft-lbs (245 N·m)
Important Notes
Use a torque wrench with a high-capacity range.
3

Propeller/Drive Shaft Bolts

M10 x 1.5
Torque Specification
47 ft-lbs (64 N·m)
Important Notes
Ensure proper alignment before tightening.

Shift Control

1

Shift Linkage Bolts

M6 x 1.0
Torque Specification
16 ft-lbs (22 N·m)
Important Notes
Estimated value based on typical M6 bolt torque specifications.

Suspension

Torque specifications for Suspension

Struts Shocks

1

Strut/Shock Absorber Mounting Bolts

M10 x 1.25
Torque Specification
33 ft-lbs (45 N·m)
Important Notes
Ensure proper alignment before torquing.
2

Lower Strut Bolts

M12 x 1.5
Torque Specification
47 ft-lbs (64 N·m)
Important Notes
Estimated value based on similar component standards.
3

Upper Strut Mount Bolts

M8 x 1.25
Torque Specification
22 ft-lbs (30 N·m)
Important Notes
Estimated value based on similar component standards.

Control Arms

1

Control Arm Bolts

M12 x 1.5
Torque Specification
36 ft-lbs (49 N·m)
Important Notes
Ensure proper alignment before torquing.
2

Ball Joint Nut

M12 x 1.25
Torque Specification
36 ft-lbs (49 N·m)
Important Notes
Ensure the ball joint is seated properly before torquing.

Steering

1

Tie Rod End Nut

M12 x 1.25
Torque Specification
36 ft-lbs (49 N·m)
Important Notes
Ensure proper alignment before torquing.
2

Steering Knuckle Bolts

M14 x 1.5
Torque Specification
80 ft-lbs (108 N·m)
Important Notes
Estimated value based on similar component standards.

Sway Bar

1

Sway Bar Link Nut

M10 x 1.25
Torque Specification
43 ft-lbs (59 N·m)
Important Notes
Ensure the sway bar is properly aligned before torquing.

Drivetrain

1

CV Joint/Axle Nut

M24 x 1.5
Torque Specification
181 ft-lbs (245 N·m)
Important Notes
Use a torque wrench capable of high torque values.

Rear Suspension

1

Rear Trailing Arm Bolts

M14 x 1.5
Torque Specification
80 ft-lbs (108 N·m)
Important Notes
Estimated value based on similar component standards.

Troubleshooting Guide

Common issues, diagnostic steps, and prevention guidelines

Common Issues

Bolt stretching, stripped threads, uneven torque patterns

Loose Components

Symptoms:
  • Rattling or vibration noises
  • Visible movement in components
  • Uneven panel gaps
Solutions:
  • Clean threads and mounting surfaces
  • Replace damaged fasteners
  • Apply proper torque in sequence
  • Use thread locker if specified

Stripped Fasteners

Symptoms:
  • Unable to achieve proper torque
  • Fastener spins freely
  • Visible thread damage
Solutions:
  • Use thread repair kit if appropriate
  • Install thread insert (HeliCoil)
  • Replace component if threaded hole is damaged
  • Upgrade to higher grade fastener if recommended

Overtightened Components

Symptoms:
  • Cracked or deformed parts
  • Broken fasteners
  • Compressed gaskets or seals
Solutions:
  • Replace damaged components
  • Use new fasteners
  • Follow proper torque sequence
  • Verify correct torque specifications

Diagnostic Steps

Visual inspection, torque verification, thread assessment

1

Visual Inspection

Inspect the affected area for any visible signs of damage or wear

  • Check for cracks or deformation
  • Look for signs of excessive wear
  • Verify proper fastener installation
2

Torque Verification

Verify the torque applied to the fasteners

  • Check the torque wrench calibration
  • Verify the torque specification
  • Compare the applied torque to the specification
3

Thread Assessment

Assess the condition of the threads

  • Check for signs of thread damage
  • Verify the thread type and size
  • Check for proper thread engagement

Prevention Guidelines

Best practices, maintenance tips, tool care

Best Practices

  • Always follow the recommended torque specification
  • Use the correct type and size of fasteners
  • Verify the torque wrench calibration regularly

Maintenance Tips

  • Regularly inspect the affected area for signs of wear or damage
  • Replace damaged or worn-out components promptly
  • Keep the work area clean and organized

Tool Care

  • Regularly clean and maintain the torque wrench
  • Store the torque wrench in a dry and secure location
  • Verify the torque wrench calibration before each use

Frequently Asked Questions

Find answers to common questions about torque specifications

Q1

What IS the recommended torque for the cylinder head bolts on a 1998 Acura Integra Gsr?

The cylinder head bolts on a 1998 Acura Integra Gsr should be tightened to 61 ft-lbs (82 Nm) in three stages: 20 ft-lbs (27 Nm), 41 ft-lbs (55 Nm), and then 61 ft-lbs (82 Nm).

Q2

How do I properly torque the lug nuts on my 2001 Acura Integra LS?

Clean the lug nuts and wheel studs thoroughly. Apply a small amount of anti-seize lubricant to the threads of the lug nuts. Hand-tighten the lug nuts onto the wheel studs. Use a torque wrench to tighten the lug nuts to 80 ft-lbs (108 Nm) in a star pattern.

Q3

What IS the torque specification for the intake manifold bolts on a 1994 Acura Integra Rs?

The intake manifold bolts on a 1994 Acura Integra RS should be tightened to 18 ft-lbs (24 Nm) in a criss-cross pattern.

Q4

What are some common mistakes to avoid when applying torque to engine bolts?

Common mistakes to avoid when applying torque to engine bolts include: over-tightening or under-tightening bolts, using the wrong size or type of wrench, and not following the specified torque sequence.

Q5

How do I ensure that I am using the correct torque value for my specific Acura Integra model?

Refer to the specific torque specifications provided in the vehicle's service manual or contact an authorized Acura dealership for accurate information.

Environmental Considerations

Temperature, humidity, and seasonal effects on torque specifications

Temperature Effects

Includes: High Heat, Cold Weather, Thermal Cycling

Temperature can significantly impact torque values and fastener behavior

Cold Weather

Effects:
  • Increased material brittleness
  • Higher torque required due to thread contraction
  • Reduced thread lubricant effectiveness
Recommendations:
  • Allow components to warm to room temperature when possible
  • Consider using winter-grade thread lubricants
  • Check torque values more frequently during winter months

Hot Weather

Effects:
  • Thermal expansion of components
  • Decreased friction in threads
  • Accelerated lubricant breakdown
Recommendations:
  • Check torque when components are at normal operating temperature
  • Use temperature-resistant thread lockers
  • Consider re-torquing after heat cycles

Humidity and Corrosion

Covers: Rust Prevention, Salt Exposure, Moisture Control

Moisture and corrosion can affect fastener integrity and torque values

High Humidity

Effects:
  • Accelerated corrosion formation
  • Reduced friction coefficient
  • Potential thread seizing
Prevention:
  • Use corrosion-resistant fasteners
  • Apply appropriate anti-seize compounds
  • Maintain proper protective coatings

Salt Exposure

Effects:
  • Rapid corrosion development
  • Thread damage
  • Seized fasteners
Prevention:
  • Regular underbody washing
  • Use of sacrificial anodes where appropriate
  • Application of protective coatings

Seasonal Maintenance

Spring, Summer, Fall, and Winter maintenance schedules

Spring

  • Inspect for winter damage
  • Clean and protect exposed fasteners
  • Check torque on critical components

Summer

  • Monitor heat-affected components
  • Check expansion-related loosening
  • Inspect cooling system mounts

Fall

  • Prepare for winter conditions
  • Apply corrosion protection
  • Verify all fasteners are properly torqued

Winter

  • More frequent inspection of critical fasteners
  • Check for salt damage
  • Monitor suspension component torque

Related Resources

Tools, service procedures, and technical bulletins

Recommended Tools

Digital Torque Wrench (10-100 Nm)

For accurate bolt tightening, preventing damage and ensuring correct assembly.

  • Digital display for precise readings
  • Audible alert for target torque
  • Multiple units (Nm, ft-lb, in-lb)
  • Reversible ratcheting mechanism
Learn more
Service Procedures
Technical Service Bulletins

Legal Disclaimer

Important information about using this content

Always refer to your vehicle's service manual and take appropriate safety precautions when performing any maintenance or repairs.

General Information
The information provided on this website is for general informational purposes only. While we strive to maintain accuracy in our content, all specifications, procedures, and technical information should be verified against your vehicle's official service manual or with the manufacturer directly.
Warranty & Liability

The content on this website is provided "as is" without any representations or warranties, express or implied. We make no representations or warranties regarding the accuracy, completeness, or availability of the information.

We shall not be liable for any direct, indirect, special, or consequential damages arising from the use of information on this website.

Technical Information
  • All specifications, including torque values, fluid capacities, and maintenance procedures, should be verified against your vehicle's factory service manual.
  • Vehicle specifications and procedures may vary by model year, trim level, and region.
  • Always follow the manufacturer's recommended procedures and safety precautions.
  • Working on vehicles can be dangerous. Always take proper safety precautions and use appropriate safety equipment.
  • If you're unsure about any procedure, consult a qualified professional mechanic.
Intellectual Property
All content, including text, images, and specifications, is protected by copyright and other intellectual property laws. Any unauthorized use or reproduction is prohibited.

About the Author

Expert automotive knowledge and experience

Alan Montanye - Automotive Technical Specialist
ASE

Alan Montanye

Automotive Technical Specialist

ASE Master Certified Technician with over a decade of hands-on experience in automotive repair and diagnostics.

Facebook Contact
15+ Years
Experience
500+ Guides
Guides
50+ Makes
Vehicles
1000+ Solutions
Solutions

Diagnostic

Specialized in advanced diagnostic techniques using modern scan tools and oscilloscopes.

Repair

Expert in both traditional mechanical repairs and modern vehicle systems.

Additional Expertise

Documentation

Created over 500 detailed repair guides and technical documents.

Training

Conducted technical training sessions and contributed to repair databases.

Certifications & Research

Certifications

  • ASE Master Technician Certification
  • Advanced Diagnostic Specialist
  • Hybrid/Electric Vehicle Systems
  • Performance Tuning Expert

Research & Community

Actively researches emerging technologies and contributes to automotive forums.

© 2025 Acura Specs. All rights reserved.

Privacy Policy Terms of Service