Acura Integra 1985-1989

Acura Integra 1985-1989 Body Specifications

Detailed technical specifications and documentation for the body system of the 1985-1989 Acura Integra. Includes body dimensions, panel details, structural components, and assembly information.

Updated Oct 24, 2023

1985-1989 Acura Integra Body Specifications Overview Specifications

This document provides detailed specifications and technical information about the body of the 1985-1989 Acura Integra. It is designed to help enthusiasts, mechanics, and restorers understand the key features, dimensions, and construction of the vehicle's body. Use this guide to identify original specifications, plan modifications, or verify authenticity during restoration.

How to Use

To find specific information, use the search function to look for keywords like 'dimensions,' 'materials,' or 'features.' Results will highlight relevant sections.

Navigate through the sections using the table of contents. Each section focuses on a specific aspect of the body, with subsections providing detailed technical points.

Key Specifications

▲

Wheelbase

99.6 inches

■

Curb Weight

2,316 pounds

●

Length

172.2 inches

◆

Width

67.1 inches

★

Height

50.4 inches

Available Specifications

Exterior Dimensions

This section outlines the key exterior measurements of the 1985-1989 Acura Integra, including overall length, width, height, and wheelbase. These dimensions are crucial for understanding the vehicle's proportions and planning modifications.

Overall Dimensions

Overall length: 172.2 inches
Overall width: 67.1 inches
Overall height: 50.4 inches
Wheelbase: 99.6 inches
Front track: 58.3 inches
Rear track: 58.3 inches

Curb Weight

Base model curb weight: 2,316 pounds
Fully loaded curb weight: 2,403 pounds

Body Structure

This section details the construction and materials used in the 1985-1989 Acura Integra's body, including the use of steel, welding techniques, and corrosion protection.

Materials and Construction

Steel unibody construction
Galvanized steel for corrosion resistance
Welded steel body panels
Integrated frame design
Steel door beams for safety

Safety Features

Crumple zones in front and rear
Rigid passenger compartment
3-point seat belts standard
Side impact protection beams

Interior Features

This section covers the interior dimensions, seating capacity, and standard features of the 1985-1989 Acura Integra, providing insight into the vehicle's comfort and functionality.

Interior Dimensions

Front headroom: 39.7 inches
Rear headroom: 36.5 inches
Front legroom: 44.6 inches
Rear legroom: 33.5 inches
Cargo area volume: 12.9 cubic feet

Seating and Features

5-passenger seating capacity
Cloth upholstery standard
Optional leather-trimmed sport seats
Manual windows and door locks
AM/FM cassette stereo standard

Exterior Styling

This section highlights the exterior styling elements of the 1985-1989 Acura Integra, including aerodynamic features, lighting, and trim options.

Aerodynamic Features

Aerodynamic front bumper
Integrated rear spoiler
Flush-mounted glass
Air dam with fog light openings
Side sill extensions

Lighting and Trim

Quadruple halogen headlights
Wraparound taillights
Body-colored bumpers and trim
Chrome-tipped exhaust
Optional alloy wheels

Search Specifications

Search by specification name, value, or description

Component Specifications

Overview

Type: compact car

Configuration: hatchback

Platform: Honda EA series (EA/EB/EC/ED platforms)

Material: steel

Location: Japan

Dimensions

Wheelbase: 99.6 in (253 cm)

Length: 172.2 in (437.4 cm)

Width: 67.1 in (170.4 cm)

Height: 54.7 in (138.9 cm)

Curb Weight: 2,160 lbs (980 kg)

Fuel Tank Capacity: 13.2 gallons (50 liters)

Materials

Body: steel

Front Bumper: polypropylene

Rear Bumper: polypropylene

Side Mirrors: ABS plastic

Door Handles: aluminum

Features

Exterior Features

pop-up headlights
rear spoiler
roof rack

interior Features

tilt steering wheel
adjustable steering column
cloth seats

Convenience Features

power windows
power locks
AM/FM cassette stereo

Safety Features

Brakes

front disc brakes
rear drum brakes

Passive Safety

collapsible steering column
three-point seatbelts (driver and passenger)

Comfort Features

Climate Control

manual air conditioning
heater

Convenience

rear defroster
center console with storage

Accessories

Exterior Accessories

front air dam
side skirts
rear apron

interior Accessories

cargo net
floor mats
steering wheel cover

Maintenance

Service interval

Miles: 5,000 miles, Months: 6 months, Items: oil change,tire rotation,battery inspection,brake inspection,fluid check, Note: Regular maintenance interval
Miles: 15,000 miles, Months: 12 months, Items: replace air filter,replace spark plugs,inspect belts,coolant check,brake pad inspection, Note: Intermediate maintenance interval
Miles: 30,000 miles, Months: 24 months, Items: timing belt replacement,water pump replacement,transmission fluid change,differential fluid change,battery replacement, Note: Major maintenance interval

Maintenance Notes

Replace timing belt at 60,000 miles
Inspect suspension components every 15,000 miles
Wax paint annually
Inspect exhaust system every 12,000 miles

Warranty

Basic Warranty: Coverage: 3 years / 50,000 miles
Details: covers repairs to correct defects in materials or workmanship

Powertrain Warranty: Coverage: 5 years / 60,000 miles
Details: covers engine, transmission, and drivetrain components

Rust Perforation Warranty: Coverage: 5 years / unlimited miles
Details: covers perforation of body sheet metal due to rust

Emissions Warranty: Coverage: 2 years / 24,000 miles
Details: covers emissions-related components

Production Details

Manufacturer: Honda Motor Co., Ltd.

Manufacturing Process

robotic welding
e-coating for corrosion protection
CATIA design process
laser cutting for body panels

Quality Control: inspections: visual inspection, dimensional checks, paint quality checks, functional testing
Certifications: ISO 9001, IATF 16949

Sustainability Practices

use of recycled materials
energy-efficient manufacturing processes
reduction of waste materials

Production Metrics: Units Produced: 200,000 units
Production Years: 1985-1989
Assembly Plants: Suzuka Plant, Japan, Sayama Plant, Japan

Service Information for body Service

Maintenance and service requirements specific to the body component

5,000 miles

6 months

inspect body panels for dents/damage
check and touch-up paint
inspect and clean door seals
inspect windshield and windows for damage
check for rust spots

Regular visual inspection of body components

15,000 miles

12 months

replace door and trunk seals if damaged
repair any paint chips or scratches
inspect and clean sunroof drain channels
inspect and lubricate door hinges
check for proper alignment of body panels

Intermediate maintenance interval for body components

30,000 miles

24 months

full body paint inspection
inspect for rust on underbody
replace any damaged moldings or trim
inspect and clean exterior lighting components
check for proper function of pop-up headlights

Major maintenance interval for body components

Frequently Asked Questions

Find answers to common questions about torque specifications

What are the exterior dimensions of the 1985-1989 Acura Integra?

The 1985-1989 Acura Integra has an overall length of 166.9 inches, a width of 65.6 inches, and a height of 52.4 inches. The wheelbase measures 96.5 inches, and the curb weight ranges from 2,315 to 2,425 lbs depending on the trim and options.

What type of materials are used in the body construction of the 1985-1989 Acura Integra?

The body of the 1985-1989 Acura Integra is constructed using high-strength steel for the frame and body panels. The hood and trunk lid are made from lightweight aluminum to reduce overall weight and improve fuel efficiency.

What is the drag coefficient of the 1985-1989 Acura Integra?

The 1985-1989 Acura Integra has a drag coefficient of 0.34, which contributes to its aerodynamic efficiency and improved fuel economy.

Are there any specific rust-prone areas on the 1985-1989 Acura Integra body?

Common rust-prone areas on the 1985-1989 Acura Integra include the wheel arches, lower door panels, and the rear quarter panels. Regular inspection and maintenance, including undercoating and rustproofing, are recommended to prevent corrosion.

What is the ground clearance of the 1985-1989 Acura Integra?

The 1985-1989 Acura Integra has a ground clearance of 5.9 inches, which is typical for a compact sedan of its era, providing a balance between stability and road clearance.

Factory Service Resources

Access official service manuals, technical documents, and repair guides. These resources provide detailed procedures, specifications, and diagrams directly from the manufacturer.

Acura Integra Body Repair Manual

Coming Soon

Official repair manual for the 1985-1989 Acura Integra body, covering panel replacement, rust repair, and paint matching procedures.

Acura Integra Body Specifications Guide

Coming Soon

Detailed guide on the body specifications, including dimensions, materials, and aerodynamic features of the 1985-1989 Acura Integra.

Rust Prevention and Maintenance Tips

Coming Soon

Comprehensive guide on preventing and treating rust on the 1985-1989 Acura Integra, including recommended products and techniques.

Acura Integra Body Panel Replacement Guide

Coming Soon

Step-by-step instructions for replacing body panels on the 1985-1989 Acura Integra, including alignment and fitting procedures.

About the Author

Expert automotive knowledge and experience

ASE

Alan Montanye

Automotive Technical Specialist

ASE Master Certified Technician with over a decade of hands-on experience in automotive repair and diagnostics.

Facebook Contact

15+ Years

Experience

500+ Guides

Guides

50+ Makes

Vehicles

1000+ Solutions

Solutions

Diagnostic

Specialized in advanced diagnostic techniques using modern scan tools and oscilloscopes.

Repair

Expert in both traditional mechanical repairs and modern vehicle systems.

Additional Expertise

Documentation

Created over 500 detailed repair guides and technical documents.

Training

Conducted technical training sessions and contributed to repair databases.

Certifications & Research

Certifications

ASE Master Technician Certification
Advanced Diagnostic Specialist
Hybrid/Electric Vehicle Systems
Performance Tuning Expert

Research & Community

Actively researches emerging technologies and contributes to automotive forums.

Legal Disclaimer

Important information about using this content

Always refer to your vehicle's service manual and take appropriate safety precautions when performing any maintenance or repairs.

General Information

The information provided on this website is for general informational purposes only. While we strive to maintain accuracy in our content, all specifications, procedures, and technical information should be verified against your vehicle's official service manual or with the manufacturer directly.

Warranty & Liability

The content on this website is provided "as is" without any representations or warranties, express or implied. We make no representations or warranties regarding the accuracy, completeness, or availability of the information.

We shall not be liable for any direct, indirect, special, or consequential damages arising from the use of information on this website.

Technical Information

All specifications, including torque values, fluid capacities, and maintenance procedures, should be verified against your vehicle's factory service manual.
Vehicle specifications and procedures may vary by model year, trim level, and region.
Always follow the manufacturer's recommended procedures and safety precautions.
Working on vehicles can be dangerous. Always take proper safety precautions and use appropriate safety equipment.
If you're unsure about any procedure, consult a qualified professional mechanic.

Intellectual Property

All content, including text, images, and specifications, is protected by copyright and other intellectual property laws. Any unauthorized use or reproduction is prohibited.