Acura ILX 2013-2021 2.4L Engine Specifications
Detailed technical specifications and documentation for the 2.4L K24W7 engine in the 2013-2021 Acura ILX. Includes performance metrics, maintenance guidelines, and OEM part numbers.
2013-2021 Acura ILX 2.4L Engine Specifications Overview Specifications
This document provides a comprehensive overview of the 2.4L engine specifications for the 2013-2021 Acura ILX. It includes detailed technical information, performance metrics, and maintenance guidelines. Use this guide to understand the engine's capabilities, optimize its performance, and ensure proper maintenance. Navigate through the sections to find specific details or use the quick reference for key specifications.
How to Use
To find specific information, use the search functionality by entering keywords such as 'horsepower,' 'torque,' or 'fuel efficiency.' Results will highlight relevant sections.
Navigate through the document by scrolling through the sections. Each section is divided into subsections with detailed points. Use the table of contents or quick reference for faster access.
Key Specifications
Displacement
2.4 liters
Horsepower
201 HP @ 6,800 rpm
Torque
180 lb-ft @ 3,600 rpm
Transmission
8-speed dual-clutch automatic
Fuel Economy (combined)
25 mpg
Available Specifications
Engine Overview
This section provides an overview of the 2.4L engine, including its architecture, displacement, and key features. It serves as a foundational understanding of the engine's design and capabilities.
Engine Overview
This section provides an overview of the 2.4L engine, including its architecture, displacement, and key features. It serves as a foundational understanding of the engine's design and capabilities.
Engine Architecture
- 2.4L inline-4 cylinder engine
- Aluminum alloy block and cylinder head
- Chain-driven dual overhead camshafts
- 4 valves per cylinder with i-VTEC technology
- Variable cylinder management system
Displacement and Compression
- Displacement: 2.4 liters (144 cubic inches)
- Compression ratio: 11.1:1
- Bore and stroke: 87mm x 99mm
Performance
This section details the performance capabilities of the 2.4L engine, including horsepower, torque, and transmission specifications. It also covers acceleration and fuel efficiency metrics.
Performance
This section details the performance capabilities of the 2.4L engine, including horsepower, torque, and transmission specifications. It also covers acceleration and fuel efficiency metrics.
Power and Torque
- Horsepower: 201 HP @ 6,800 rpm
- Torque: 180 lb-ft @ 3,600 rpm
- Redline: 6,800 rpm
- Fuel type: Regular unleaded (87 octane)
Transmission and Drivetrain
- 8-speed dual-clutch transmission (DCT) with torque converter
- Front-wheel drive (FWD)
- Electric power steering
- MacPherson strut front suspension
Acceleration and Fuel Efficiency
- 0-60 mph: 6.4 seconds
- Top speed: 125 mph (electronically limited)
- EPA fuel economy: 22 mpg city, 31 mpg highway, 25 mpg combined
- Fuel tank capacity: 13.2 gallons
Emissions and Environment
This section covers the emissions standards and environmental features of the 2.4L engine. It includes information on emissions ratings and fuel efficiency technologies.
Emissions and Environment
This section covers the emissions standards and environmental features of the 2.4L engine. It includes information on emissions ratings and fuel efficiency technologies.
Emissions Ratings
- EPA emissions rating: ULEV-2 (Ultra Low Emission Vehicle)
- CARB emissions rating: LEV2-ULEV
- Meets federal and state emissions standards
Fuel Efficiency Technologies
- Eco Assist system for improved fuel economy
- Variable cylinder management (VCM)
- Active noise cancellation system
- Smart vent valve for improved emissions
Maintenance and Service
This section provides maintenance and service information for the 2.4L engine, including oil specifications, service intervals, and recommended practices.
Maintenance and Service
This section provides maintenance and service information for the 2.4L engine, including oil specifications, service intervals, and recommended practices.
Oil and Fluids
- Recommended oil: 0W-20 synthetic blend
- Oil capacity: 4.2 quarts (4.0 liters) with filter
- Coolant type: Honda Long Life Coolant
- Transmission fluid: Honda ATF DW-1
Service Intervals
- Oil change interval: Every 5,000 to 7,500 miles
- Tire rotation: Every 5,000 miles
- Spark plug replacement: Every 30,000 miles
- Timing belt replacement: Every 105,000 miles
Technology and Innovations
This section highlights the advanced technologies and innovations featured in the 2.4L engine, including fuel-saving and performance-enhancing systems.
Technology and Innovations
This section highlights the advanced technologies and innovations featured in the 2.4L engine, including fuel-saving and performance-enhancing systems.
Engine Technologies
- i-VTEC (Intelligent Variable Valve Timing and Lift Electronic Control)
- Eco Assist system with ECON mode
- Variable cylinder management (VCM)
- Direct ignition system
- High-flow exhaust system
Fuel-Saving Features
- Automatic start/stop technology
- Regenerative braking system
- Low-rolling-resistance tires
- Aerodynamic underbody panels
Search Specifications
Search by specification name, value, or description
Type to search through torque specifications. Results will appear below as you type.
Engine Specifications
General
- Engine Code
- K24Z7
- Displacement
- 2.4L (2354 cc)
- Configuration
- Inline-4
- Aspiration
- Naturally aspirated
- Valvetrain
- DOHC, 16-valve, i-VTEC
- Fuel System
- Multi-Point Fuel Injection (MPFI)
- Bore
- 87.0 mm
- Stroke
- 99.0 mm
- Compression Ratio
- 11.0:1
- Redline
- 7000 rpm
- Max Engine Speed
- 7200 rpm
Performance
- Horsepower
- 201 hp @ 7000 rpm
- Torque
- 170 lb-ft @ 4400 rpm
- Fuel Economy City
- 24 mpg
- Fuel Economy Highway
- 35 mpg
- Fuel Economy Combined
- 28 mpg
- Emission Standard
- Tier 2 Bin 5
Lubrication
- Oil Capacity
- 4.4 quarts (with filter)
- Oil Type
- 0W-20 (recommended)
- Oil Pressure
- 60-70 psi @ 3000 rpm
- Oil Change interval
- 7500 miles or 12 months
- Oil Filter Part Number
- 15400-PLM-A02
Cooling
- Coolant Capacity
- 6.3 quarts
- Coolant Type
- Honda Type 2 Coolant
- Thermostat Opening Temperature
- 176°F (80°C)
- Radiator Cap Pressure
- 1.1 bar (16 psi)
- Water Pump Part Number
- 19200-R40-A01
Ignition
- Ignition System
- Direct ignition system
- Spark Plug Type
- NGK IZFR6K11
- Spark Plug Gap
- 0.040-0.043 in (1.0-1.1 mm)
- Ignition Coil Part Number
- 30520-R40-A01
- Ignition Timing
- 10° BTDC at idle
Fuel
- Fuel Type
- Premium unleaded (91 octane or higher)
- Fuel Tank Capacity
- 13.2 gallons
- Fuel Pump Pressure
- 50-60 psi
- Fuel injector Part Number
- 16450-R40-A01
- Fuel Filter Part Number
- 16010-R40-A01
Exhaust
- Exhaust Manifold Material
- Cast iron
- Catalytic Converter Type
- Three-way catalyst
- Exhaust Pipe Diameter
- 2.25 in
- Oxygen Sensor Part Number
- 36531-R40-A01
- Exhaust Gas Temperature
- Up to 1600°F (871°C)
Maintenance
- Timing Chain Replacement Interval
- Not specified (lifetime component)
- Valve Clearance intake
- 0.20-0.24 mm (cold)
- Valve Clearance Exhaust
- 0.28-0.32 mm (cold)
- Drive Belt Replacement interval
- 60,000 miles or 48 months
- Air Filter Part Number
- 17220-R40-A01
- Cabin Air Filter Part Number
- 80292-TX3-A01
Diagnostics
- Obd2 Port Location
- Under dashboard, driver's side
- Diagnostic Trouble Codes
-
- P0171
- P0300
- P0420
- Engine Light Activation
- MIL (Malfunction Indicator Lamp)
- Scan Tool Compatibility
- Honda HDS or equivalent
- Self Diagnostic Mode
- Supports Mode 1-10
Safety
- Engine Immobilizer
- Standard
- Engine Shutdown Temperature
- 260°F (127°C)
- Oil Pressure Warning Light
- Activates below 5 psi
- Coolant Temperature Warning Light
- Activates above 248°F (120°C)
- Fuel Cutoff System
- Activates during collision
Service Information Service
Detailed service requirements and schedules for the 2.4L engine
- Oil and filter change
- Inspect drive belt
- Check fluid levels (coolant, brake, power steering)
- Inspect exhaust system
Use only recommended fluids and parts
- Replace air filter
- Replace cabin air filter
- Inspect spark plugs
- Inspect valve clearance
Adjust valve clearance if necessary
- Replace drive belt
- Replace coolant
- Inspect timing chain
- Inspect fuel system
Timing chain inspection is visual only
Common Questions
Find answers to common questions about torque specifications
Q1 What is the horsepower and torque output of the 2.4L engine in the 2013-2021 Acura ILX?
What is the horsepower and torque output of the 2.4L engine in the 2013-2021 Acura ILX?
The 2.4L inline-4 engine in the 2013-2021 Acura ILX produces 201 horsepower at 7000 RPM and 180 lb-ft of torque at 3600 RPM. It features i-VTEC (Variable Valve Timing and Lift Electronic Control) for optimized performance and efficiency.
Q2 What type of oil is recommended for the 2.4L engine, and what is the oil capacity?
What type of oil is recommended for the 2.4L engine, and what is the oil capacity?
Acura recommends using 0W-20 synthetic oil for the 2.4L engine. The oil capacity is approximately 4.2 quarts (4.0 liters) with a filter change. Always refer to the owner's manual for the exact specifications and intervals.
Q3 What is the compression ratio of the 2.4L engine, and how does it affect performance?
What is the compression ratio of the 2.4L engine, and how does it affect performance?
The 2.4L engine has a compression ratio of 11.6:1. This high compression ratio improves thermal efficiency, resulting in better fuel economy and increased power output. It requires premium unleaded fuel (91 octane or higher) for optimal performance.
Q4 What is the recommended service interval for the timing chain on the 2.4L engine?
What is the recommended service interval for the timing chain on the 2.4L engine?
The 2.4L engine uses a timing chain, which is designed to last the lifetime of the engine under normal operating conditions. However, it is recommended to inspect the timing chain during major service intervals (every 60,000-100,000 miles) for wear or damage.
Q5 What is the firing order of the 2.4L engine, and why is it important?
What is the firing order of the 2.4L engine, and why is it important?
The firing order for the 2.4L engine is 1-3-4-2. This sequence ensures smooth engine operation by balancing the power strokes across the cylinders. Incorrect firing order can lead to engine misfires, reduced performance, and potential damage.
Factory Service Resources
Access official service manuals, technical documents, and repair guides. These resources provide detailed procedures, specifications, and diagrams directly from the manufacturer.
2013-2021 Acura ILX Owner's Manual
Coming SoonThe official owner's manual for the 2013-2021 Acura ILX, containing detailed information on maintenance schedules, specifications, and operating procedures for the 2.4L engine.
2.4L Engine Maintenance Guide
Coming SoonA comprehensive guide to maintaining the 2.4L engine, including oil change intervals, spark plug replacement, and timing chain inspection.
Acura Genuine Parts Catalog
Coming SoonAccess the official Acura parts catalog to find genuine replacement parts for the 2.4L engine, ensuring compatibility and optimal performance.
2.4L Engine Technical Specifications
Coming SoonDetailed technical specifications for the 2.4L engine, including dimensions, torque values, and performance metrics.
Legal Disclaimer
Important information about using this content
Always refer to your vehicle's service manual and take appropriate safety precautions when performing any maintenance or repairs.
General Information
Warranty & Liability
The content on this website is provided "as is" without any representations or warranties, express or implied. We make no representations or warranties regarding the accuracy, completeness, or availability of the information.
We shall not be liable for any direct, indirect, special, or consequential damages arising from the use of information on this website.
Technical Information
- All specifications, including torque values, fluid capacities, and maintenance procedures, should be verified against your vehicle's factory service manual.
- Vehicle specifications and procedures may vary by model year, trim level, and region.
- Always follow the manufacturer's recommended procedures and safety precautions.
- Working on vehicles can be dangerous. Always take proper safety precautions and use appropriate safety equipment.
- If you're unsure about any procedure, consult a qualified professional mechanic.
Intellectual Property
About the Author
Expert automotive knowledge and experience
'/%3E%3Cpath d='M60 30a20 20 0 1 1 0 40 20 20 0 0 1 0-40zm0 45c16.5 0 30 7.5 30 16.8V100H30v-8.2c0-9.3 13.5-16.8 30-16.8z' fill='%23404040'/%3E%3C/svg%3E)
Diagnostic
Specialized in advanced diagnostic techniques using modern scan tools and oscilloscopes.
Repair
Expert in both traditional mechanical repairs and modern vehicle systems.
Additional Expertise
Documentation
Created over 500 detailed repair guides and technical documents.
Training
Conducted technical training sessions and contributed to repair databases.
Certifications & Research
Certifications
- ASE Master Technician Certification
- Advanced Diagnostic Specialist
- Hybrid/Electric Vehicle Systems
- Performance Tuning Expert
Research & Community
Actively researches emerging technologies and contributes to automotive forums.